volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 5579 > < Procedures|Page 5577
Page 6
background image

-

Use only Volvo original brake fluid marked DOT 4+. Never re-use brake fluid. Always keep brake fluid in its original packing, well sealed.

-

Check continuously that there is enough brake fluid in the brake fluid reservoir when replacing brake fluid.

Preparations 

-

Ignition off.

-

Jack car up and remove wheels.

-

Clean around brake fluid reservoir cap.

Get a drain bottle and hose to collect brake fluid in.

Replacing brake fluid, front 

-

Remove protective cap from bleed nipple.

-

Connect drain bottle hose. Open nipple approx. one turn.

-

Push brake caliper piston to bottom of caliper using a bolt clamp, see illustration. Leave bolt clamp in the pushed-in position.

-

Push brake pedal right down and hold it there for approx. 2 seconds before releasing it. Repeat until 2 - 3 dl (0.2 - 0.3 US qt) of brake fluid has
drained off.

-

Close bleed nipple while holding brake pedal right down.

-

Remove hose and re-fit protective cap.

-

Remove bolt clamp from brake caliper.

-

Depress brake pedal a few times.

Removing brake pad LH rear 

-

Remove brake pad brake caliper.

Replacing brake fluid LH rear 

Procedures|Page 5579 > < Procedures|Page 5577