C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Timing Belt: Service and Repair
Replacing the Timing Belt / Idler Pulley / Belt Tensioner
Replacing the timing belt / idler pulley / belt tensioner
Special tools:
999 5433 COUNTERHOLD See: Tools and Equipment/999 5433 Counterhold
Note! As the illustrations in the information are used for different model years and / or models, certain variations may occur. However, the
essential information in the illustrations is always correct.
Remove components
Caution! Remove the ignition key from the ignition switch before beginning work.
Note! The crankshaft or camshaft must not be rotated under any circumstances other than those listed below. Failure to follow these
instructions may cause damage to the valves.
Remove:
-
the upper timing belt cover.
-
the servo reservoir and the expansion tank.
Lift up and place on top of the engine.
Note! Take care not to spill servo oil from the bleed hole in the cap. Place paper wipe around the reservoir and then cover with a plastic
bag as protection. Spilled servo oil is highly inflammable.
-
the auxiliaries belt.
-
the front camshaft belt cover.
Position the engine according to the marking
