volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

All Technical Service Bulletins for Oxygen Sensor: > < Engine Controls - DTC's 280A/260A/261A/262A/2A1A Set|Page 15392
Page 3
background image

-

a tie strap as illustrated.

Note!

Ensure that the ends of the adapter wiring protective sheath point downwards so that water does not gather in the protective sheath.

Installing the rear sensor adaptor wiring

5

Install the adapter wiring between the existing 6-pin connector.

Note! 

Ensure that the ends of the adapter wiring protective sheath point downwards so that water does not gather in the protective sheath.

Install:

-

the inlet hose between the air cleaner (ACL) and turbocharger (TC) on the turbocharger (TC)

-

the air cleaner (ACL) housing.

WARRANTY STATEMENT: Claims may be submitted under the New Car Warranty when there is a documented customer complaint, using claim type
01.

All Technical Service Bulletins for Oxygen Sensor: > < Engine Controls - DTC's 280A/260A/261A/262A/2A1A Set|Page 15392