volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacing the EVAP Canister|Page 18236 > < Replacing the EVAP Canister|Page 18234
Page 2
background image

-

Drill out the two blind rivets holding the heat deflector plate at the rear sub-frame mounting and the third rivet on the rear bracket for the exhaust
system. Use a 5 mm drill bit

-

Remove the plastic nuts and the heat deflector plate.

Removing the carbon filter container 

Replacing the EVAP Canister|Page 18236 > < Replacing the EVAP Canister|Page 18234