volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 18778 > < Procedures
Page 2
background image

Finishing

Depress the fuel rail. Ensure that all injectors sit correctly.
Screw the fuel rail into place. Use new screws. Tighten to 10 Nm.
Press the quick-release connector together until a clicking sound is heard.
At the same time connect all the connectors to the injectors.
Reinstall the cover over the fuel rail.
Start the engine. Check for fuel leakage.

Procedures|Page 18778 > < Procedures