volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Fuel Level Sensor > < Diagram Information and Instructions|Page 10075
Page 2
background image

Press the sensor into place. Tighten to 10 Nm.

Connect the connector. 
-

the wiring on the bracket 

-

the connector on the bracket 

-

clamp the wiring 

-

the hose bracket.

Applies only to B6xx4S

the air preheating hose for the air cleaner (ACL) housing.

Applies only to B6xx4T

the air cleaner (ACL) housing
the connector to the turbocharger (TC) control valve and the mass air flow (MAF) sensor 
the clamp for the intake manifold
the intake pipe between the front cover plate and the air cleaner (ACL) housing.

Fuel Level Sensor > < Diagram Information and Instructions|Page 10075