C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Transmission Temperature Sensor/Switch: Service and Repair
Replacement Of Control System Cable Harness With Oil Temperature Sensor
Replacement of control system cable harness with oil temperature sensor
Special tools:
998 5972 JACK See: Tools and Equipment/998 5972 Jack
999 5185 HOOK See: Tools and Equipment/999 5185 Hook
999 5460 Lifting hook See: Tools and Equipment/999 5460 Lifting Hook
999 5477 JOINT WEDGE See: Tools and Equipment/999 5477 Joint Wedge
999 5562 PROTECTIVE SOCKET See: Tools and Equipment/999 5562 Protective Socket
999 5563 SUPPORT See: Tools and Equipment/999 5563 Support
999 5716 Reading off tool See: Tools and Equipment/999 5716 Reading Off Tool
999 5972 FIXTURE See: Tools and Equipment/999 5972 Fixture
Note! Since the same illustrations are used for different model years and/or model variants, certain discrepancies may occur. The most
important information will always correspond to the model concerned, however.
Removing engine compartment parts
See Sealing ring, gear shift linkage rod, replacing See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Seals and Gaskets/Service and
Repair/Sealing Ring, Gear Shift Linkage Rod, Replacing.
Detach the gear change cable from the lever on the transmission and the two cable bracket screws.
Move the cable aside.
Unplug the connector from the transmission.
Undo the cable tie holding the cable harness leads together.
Separate the connector halves.
