volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 25884 > < Power Steering Fluid|Capacity Specifications|Page 25879
Page 1
background image

Power Steering Line/Hose: Procedures

Replacing the Pressure Hose

Replacing the Pressure Hose 

NOTE:  As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.

Preparations 
Disconnect the battery negative lead. First read NOTE when disconnecting/connecting the battery lead

Removing 

-

Install the lock grip pliers on the feeder hose and return hose at the reservoir.

-

Remove the nipple at the pump.

-

Raise the car.

-

Remove the clamp and bracket in the front sub-frame

-

Remove the clamp and bracket in the rear sub-frame.

-

Slacken off the nipple at the steering gear.

-

Pull down the front section of the hose.

-

Remove the hose.

Procedures|Page 25884 > < Power Steering Fluid|Capacity Specifications|Page 25879