C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Position an engine lift at the rear of the subframe.
Remove
-
on both sides the four bolts securing the subframe brackets to the body.
-
the two bolts together with the brackets and washers.
Remove the subframe's front bolts 10-15 mm .
Lower the subframe at the rear. Make sure that the steering gear bolts come away from the frame.
Remove the engine lift.
Place an oil receptacle under the steering gear and detach the oil pipes from the steering gear. (Applicable to LHD cars only.)
Remove
-
the retaining bolt for the steering column universal joint. Then press the universal joint up and away from the steering gear.
-
the bolt securing the steering gear to the rear engine mounting.
RHD cars: Lift out the steering gear to the right.
LHD cars: Lift out the steering gear to the left.
Fitting the steering gear
Note! When changing the steering gear and the bracket for the middle attachment point: Do not tighten the bracket retaining bolt just yet.
