C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Press the subframe up at the rear. Use an engine lift. Fit the steering gear retaining bolts in the frame at the same time.
Fit new bolts loosely in the subframe.
Move the engine lift over to the front of the frame and change the frame's front retaining bolts. Do not tighten just yet.
First tighten the bolts on the LH side of the subframe to 105 Nm and then angle tighten 120° .
Now tighten the bolts on the RH side by the same amount as on the LH side.
Finally, tighten the bracket retaining bolts on both sides to 50 Nm .