C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
Remove the control stalks. Disconnect the connectors from the control stalks.
Locking the contact reel
-
Lock the contact reel in the "1 O'clock" position using the locking screw.
-
Coat the slip ring surface using a thin layer of low-temperature grease, P/N 1161417-9.
Connector
-
Disconnect the connector from the bracket located over the steering column. On left-hand drive cars, disconnect the right connector.
-
Disconnect the connector for the ignition switch.
-
Disconnect the connector for the immobilizer (where applicable).
Control module
Remove the control module for the immobilizer (where applicable).
The connectors and wiring harness
-
Disconnect the connectors the from stop lamp switch and the accelerator pedal (AP) module. Remove the wiring from the steering column and the
accelerator pedal (AP) module.
-
Disconnect the cable trunk from the steering column and place it to one side.
Removing the mechanical cable for the ignition switch interlock