volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Steering - Lower Steering Shaft Replacement|Page 25971 > < Steering - Lower Steering Shaft Replacement|Page 25969
Page 8
background image

-

the joint for the lower steering shaft

-

a new screw and nut for the lower steering shaft mounting in the joint. Tighten to 30 Nm.

-

Tighten both the screws holding the steering column. Tighten to 50 Nm.

Installing the cable trunk and connectors 

-

Install
-

the cable trunk on the steering column

-

the connectors for the stop lamp switch and the accelerator pedal (AP) module.

NOTE:  Do not forget the rubber which prevents the accelerator pedal (AP) module from loosening.

-

Clamp the wiring as illustrated.

Installing the connectors 

Install

-

the connector on the bracket which is located over the steering column

-

the connectors for the SRS system contact reel

-

the contact reel

-

the connectors on the control stalks

-

the control stalks

-

the connector for the immobilizer

-

the connector for the ignition switch.

Installing the mechanical cable for the ignition switch interlock 

Install the cable for the key lock cable. (Applies to cars with automatic transmission.)

Steering - Lower Steering Shaft Replacement|Page 25971 > < Steering - Lower Steering Shaft Replacement|Page 25969