C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
Install the screws on the left-hand side of the cross member. Tighten to 20 Nm.
-
Secure the wiring using tie straps.
-
Press the panel into place. Install the screw.
-
Press the door sill trim in.
-
Install:
-
the carpet bracket the carpet
-
the polystyrene protection on the cross member
-
the connector (2)
-
the screw (1) and the soundproofing panel.
Installing the knee bolster (certain markets only)
Install:
-
the knee bolster. Tighten to 20 Nm
-
the soundproofing panel
-
the carpet bracket. Fold the floor carpet back into place.
Locking the contact reel