C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
Tighten the screw in the center of the steering wheel. Tighten to 40 Nm.
-
Switch off the ignition.
-
Remove the battery negative lead and tool 998 8695.
Installing the steering wheel module
NOTE: The battery negative lead must be removed.
-
Turn the ignition switch to position I so that the steering wheel lock is disengaged.
-
Position the lower section of the steering wheel module against the steering wheel (1).
-
Connect the connector (2).
-
Fold in the steering wheel module (3).
-
Secure the module by tightening the Torx screws from the rear. Start with the right-hand screw.
-
Turn the steering wheel to gain access to the screws.
-
Tighten the steering wheel module screws.
-
Tighten to 10 Nm.
Ensure that the steering wheel turns easily and that the steering lock functions.