C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
Check that the groove on the ball joint spindle lines up with the screw hole in the wheel spindle.
NOTE: Press the ball joint upwards so that the conical top is visible above the screwed joint on the wheel spindle.
-
Use a new locknut in the wheel spindle screw.
-
Tighten to 50 Nm.
Finishing
Install the wheel.
Rear
Replacing Transverse Arm Mountings, Both Sides
Removing components from Right Shock Absorber Mounting
Special Tools: 951 2050
4 Door, Early Version
Fold the backrests forward. Release the front edge of the cargo compartment carpet
Remove support panel under front edge of carpet
Slacken off front edge of right side panel, fold to the side
-
Remove backrest catches and panel retaining clip.
4 Door, New Version
Remove support panel according to "reference to B2"