C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
First tighten screw (C) which goes through the bracket and rear axle link. Tighten to 105 Nm (77.44 lb.ft). Angle-tighten to 90 degrees.
-
Then tighten the three bracket screws (B) to 65 Nm (48.0 lb.ft) and angle-tighten 60 degrees.
Use bevel protractor 951 2050.
Install transverse arm screws (A)
CAUTION: Use new screws and nuts Finger tighten.
NOTE: Tighten screws (A) finally after toe in setting.
Release right shock absorber
Install:
-
the spring. Tighten lower spring mounting nut to 40 Nm (29.5 lb.ft)
-
right shock absorber. Tighten to 80 Nm (59.0 lb.ft).
Install:
