volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Rear Knuckle Alignment Link|Service and Repair|Page 26075 > < Front Cross-Member Bushing|Service and Repair|Page 26071
Page 1
background image

Rear Knuckle Alignment Link: Service and Repair

Rear Axle Link, Replacing 

Special Tools:  999 5497 , 951 2050

NOTE:  The rear axle links must be changed on both sides, one at a time. The description shows the left-hand side being replaced.

Remove the nut from the rear axle link mounting screw in the trailing arm

Tap out the mounting screw

-

Use a copper mallet or similar.

On the left-hand side:

-

Remove the screw from the sound damper bracket.

-

Remove the brake pipe from the two mounting clips.

Remove the screws for the trailing arm bracket

-

Leave the bracket hanging from the mounting eyelet for the brake cable.

Rear Knuckle Alignment Link|Service and Repair|Page 26075 > < Front Cross-Member Bushing|Service and Repair|Page 26071