C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Install the screws for the trailing arm bracket loosely
Use new screws.
Tighten the screws:
A. First tighten the screw through the rear axle link bracket. Tighten to 105 Nm . Angle-tighten to 90°
B. Then tighten the three bracket screws. Tighten to 65 Nm . Angle-tighten to 60°
C. Finally tighten the nut on the screw for the trailing arm-rear axle link. Tighten to 65 Nm . Angle tighten to 120° .
Use bevel protractor 951 2050 BEVEL PROTRACTOR See: Tools and Equipment/951 2050 Bevel Protractor.
Install:
