C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Use new screws.
First tighten screw (C) which goes through the bracket and rear axle link. Tighten to 105 Nm (77.44 lb.ft). Angle-tighten to 90° .
Then tighten the three bracket screws (B) to 65 Nm (48.0 lb.ft) and angle-tighten 60° .
Use bevel protractor 951 2050 BEVEL PROTRACTOR See: Tools and Equipment/951 2050 Bevel Protractor.
Install transverse arm screws (A)
Caution! Use new screws and nuts. Finger tighten. Note! Tighten screws (A) finally after toe in setting.
Release right shock absorber
