C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Start by installing strip in lower rear corner. Outer and inner strips must fit with each other.
Check strip fits correctly with body and window opening.
Remove one piece of protective tape at a time in lower rear corner on new strip and press strip firmly in place.
Continue by installing upper front corner strip and finish with lower part of window opening.
Check strip fits correctly with body and window opening.
Note! Make sure there is a straight line along the body.
Caution! It is important that pressure is applied to the strip to ensure the tape makes full contact with the body.
Take off one piece of protective tape at a time on remaining part of new strip and press strip firmly in place.
Install rear side window in reverse order, as described in Removing rear side window outer strip.
Replacing trim strip in metal
Removing trim strip in metal
