C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
The doors must be easy to open and close
-
The edges of the door must be flush with the car exterior. The front edge of the door must be 0-1.5 mm inside the front fender and the rear edge of
the door should 0-1.5 mm outside the bodywork.
The door length can be adjusted by installing or removing shims on the upper and lower hinges.
0.3 and 0.5 mm shims are available as replacement parts.
Tighten the nut (B) to 25 Nm .
Tighten the nut (C) to 18 Nm .
Adjusting the striker plate
