volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 33689 > < Wiper Relay|Locations|Page 33683
Page 1
background image

Wiper Switch: Procedures

Replacing wiper and/or turn signal indicator switch 

Removing 

Position the steering wheel straight ahead.

Ignition off.

Remove: 

-

steering wheel cover screws. 

-

steering wheel covers. Push the upper one to one side. 

-

switch screws.

Disconnect connector. Replace switch.

Installing 

NOTE:  The turn signal switch should be in the neutral position when it is installed. The pin that controls automatic cancel may otherwise be broken off.

Procedures|Page 33689 > < Wiper Relay|Locations|Page 33683