S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Apply a little grease (P/N 1161326) to the mechanism.
Install the motor. Tighten the two screws (B and C). Tighten to 5 Nm.
Check the terminals. Secure the terminals in the correct position. Check the catch.
Reinstall the white protection.
Install the wiring. Secure to the motor using a tie strap (D).
Install the front seat. See Front seat, replacing See: Service and Repair/Removal and Replacement/Front Seat, Driver's Seat, Front Seat/Front Seat,
Replacing
Motor (forwards / backwards)
Removing the frame