S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Transfer the components as required.
Put the seat in its highest position.
Secure the gas strut and position it in the frame.
Install:
-
the rail. Position the gas strut in the mounting
-
the rear screw (B). Finger tighten.
Slide the rail forwards. Install the front screw (A).
Tighten the 2 screws. Tighten to 15 Nm.
For inner rails: Install the seat belt buckle. Tighten to 48 Nm.
Install the seat. See Front seat, replacing See: Service and Repair/Removal and Replacement/Front Seat, Driver's Seat, Front Seat/Front Seat, Replacing