S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
-
Ignition off
-
Clean the master cylinder and the area around it
-
Place cloths or paper under the master cylinder to protect painted surfaces from the brake fluid
-
Press the brake pedal several times until it becomes stiff. This is to eliminate the remaining vacuum in the system
-
Drain the brake fluid reservoir.
Removing the master cylinder
Remove:
-
The hose for the clutch cylinder. Plug the hose
-
the connector for the brake fluid level sensor
-
the two brake pipes from the master cylinder. Plug the brake pipes
-
the 2 nuts
-
the master cylinder from the power brake booster.
The brake fluid reservoir
Transfer the brake fluid reservoir according to Brake fluid reservoir, Remove/install See: Brake Fluid Reservoir/Service and Repair.
Installation
Installing master cylinder