S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
illustrated.
At the same time pull the cable carefully backwards.
Connector, assembling
Primary lock
Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the seal is correctly positioned and that the cable terminal is properly locked by pulling carefully on the cable.
Secondary lock
Press the secondary lock into place.
Connector Fuse Holder, Repair
Connector fuse holder, repair
Special tools: 951 2633 Terminal removal tool See: Tools and Equipment/951 2633 Terminal Removal Tool , 951 2639 Terminal removal tool See:
Tools and Equipment/951 2639 Terminal Removal Tool , 951 2852 Terminal removal tool See: Tools and Equipment/951 2852 Terminal Removal Tool
.
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Preparatory work
Expose the relevant fusebox.
Remove the fuses. Note the positions of the fuses.
Dismantling
Secondary lock
Releases the catches for the secondary lock.
Slide the secondary lock to one side to access the primary lock, as illustrated.