S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Close socket housings
Secondary locking
-
Close the housing and activate secondary locking by turning both the ring sections as shown in the illustration. A "click" indicates that the
secondary locking has engaged.
Check
-
Carefully pull on the cables to check the terminal is firmly attached.
Reassemble the connector
-
Insert the pin housing in the outer shell. The tab slot should be lined up with the guide groove.
-
Insert the inner tube in the outer shell. Line up the slot with the guide groove. Press the inner tube firmly in so the catches engage in the correct
position.