S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Oil Pressure Sensor: Removal and Replacement
Replace Oil Pressure Sensor
Replace oil pressure sensor
Replacing oil pressure sensor
The oil pressure sensor is at the front of the motor between the dipstick and the starter motor.
-
Disconnect the connector.
-
Unscrew the sensor.
-
Install in reverse order.
Inspecting And Replacing The Oil Pressure Sensor
Oil pressure: Inspecting and replacing the oil pressure sensor
Special tools:
999 5270 OIL PRESSURE METER See: Tools and Equipment/999 5270 Oil Pressure Meter
999 5271 Pressure gauge incl in 9995270 See: Tools and Equipment/999 5271 Pressure Gauge Incl. In 9995270
999 5272 Adapter included in 9995270 See: Tools and Equipment/999 5272 Adapter Included In 9995270
999 5273 NIPPLE See: Tools and Equipment/999 5273 Nipple
Note! When checking the oil pressure, the engine should be at a temperature which corresponds to 15 minutes normal driving (100°C). Replace
the oil and filter if the engine oil grade, type or condition cannot be determined.
Checking the engine oil pressure sensor