S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
When cable terminal is to be inserted in a housing See: Inserting a Cable Terminal In a Housing/When Cable Terminal Is To Be Inserted In a Housing
Insert the cable terminal in the appropriate cavity until the primary locking activates.
Check that the cable terminal is properly locked by pulling lightly on the cable.
Close the housing
Closing the housing See: Inserting a Cable Terminal In a Housing/Closing the Housing
The housing's secondary locking must be closed.
Connector
Connectors, repair
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Connector
The commonest types of connector and central electrical unit in the vehicle are listed here.
For more information about secondary locking, primary locking, terminal removal tools, etc., see the link by each type of connector.
Note! Before working in the connector, disconnect the battery negative terminal, Battery, disconnecting See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.