S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Crimp tool (blue), p/n 9814227
Used for cable terminals types:
-
3.5 Pin socket and 3.5 Pin
The two crimping inserts are used for cable areas (in mm 2):
-
1.0 /1.4 / 1.5 / 2.0 / 2.5/ and 0.5, 0.6 and 0.75 double folded wire
-
3.0 / 4.0
Crimping A Cable Terminal
Crimping a cable terminal
Caution! An incorrectly crimped terminal means poor electrical contact, which can cause defective operation or intermittent faults. These
problems can be difficult to detect and localize during subsequent fault tracing.
Use a Volvo crimp tool
The crimp tools from the repair kit p/n 981 4235 Replaced by 9512644 See: Tools and Equipment/981 4235 Replaced By 9512644 will give a reliable
result when used correctly.
Contact crimp tool, inhibitor function
The contact crimp tool has a ratchet which normally prevents a crimping operation from being aborted before the tool is at its final position (and the
crimping operation correctly completed). The tool will then open automatically.
To abort a crimping operation when using the contact crimp tool see To abort a terminal crimping operation.