S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
At the same time pull the cable carefully backwards.
Alternatively use tool 951 2852 Terminal removal tool See: Tools and Equipment/951 2852 Terminal Removal Tool as illustrated.
Installation
Primary lock
Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.
Secondary lock
Slide back the secondary lock.
Finishing work
Install the relays.
Note! Take care with the positioning.
Reinstall the central relay box.
KA Cables, General
KA. Cables, general
General
This Manual is for the repair and replacement of cables in an existing cable harness.
Choice of cable size and rating, cable routing for installing accessories or other installations are not covered here.
-
For mounting accessories or subsequent wiring work refer to the instructions for the particular part involved.