S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Brake Light Switch: Procedures
Replacing The Stop Lamp Switch
Conditions
-
Ignition off.
-
Remove the panel under the dashboard on the driver's side.
Removing The Stop Lamp Switch
-
Press the stop (brake) lamp switch, from the side of the connector, completely forwards.
NOTE: A number of clicks should be heard and felt when pressing.
-
Disconnect the connector.
-
Press the brake pedal as far down as possible.
-
Pull the white bushing (1) as far forward as possible.
-
Press in the two locking lugs (2) on the reverse. Remove the stop lamp switch.
Stop Lamp Switch, Installation