volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Relays and Modules - Body and Frame > < Computers/Controls - CEM Recovery after SWDL Interrupt|Page 28
Page 1
background image

Starter Cut Relay: Service and Repair

Replacing the starter motor relay for the immobilizer

Removal

Ignition off.
Remove the soundproofing panel under the instrument panel on the driver's side.

Note! Note the courtesy lighting cable.

Remove the relay from the relay box in the passenger compartment.

Installation

Install in reverse order.

Relays and Modules - Body and Frame > < Computers/Controls - CEM Recovery after SWDL Interrupt|Page 28