S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Wheel Speed Sensor: Procedures
Front Pulse Wheel
Front Pulse Wheel Replacement
Special Tools: 999 5694
NOTE: A new drive shaft is always delivered with a pulse wheel.
Removing front brake caliper
Remove the wheel cover/cap, loosen the drive shaft nut. Support the car and remove the wheel.
Remove
-
the brake hose from the support.
-
the sensor cable from the supports.
-
the two bolts from the guide pins and take the caliper of, hang it on a steel wire to avoid damaging the brake hose.
-
the brake pads.
Removing drive shaft from knuckle
Turn the steering wheel to the left.
Push the shaft out of the knuckle.
Remove the nut from the drive shaft.
Remove the two shock absorber bolts.
Push the knuckle and drive shaft down.
Push the shaft out of the knuckle.
Removing pulse wheel from drive shaft
