S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Before installation of the steering wheel the contact rollers must be placed in their center position.
When checking the center position the black spot on the yellow indicator must be located opposite the center arrow.
If the center position is indicated then it should be possible to turn the inner part of the contact roller 2 turns both clockwise and counterclockwise,
counted from the center position indicated.
If the center position is incorrectly indicated then it can be adjusted.
To adjust the center position, first carefully turn the contact roller inner part counterclockwise to the end position where a resistance is felt.
From this position, turn the contact roller inner part clockwise slightly more than two turns.
Adjust the yellow indicator by turning until the black spot is located opposite the center arrow.