S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Flex Plate: Testing and Inspection
Checking the carrier plate
Checking the carrier plate
Check the carrier plate.
Replace the carrier plate if it is damaged. See Replacing the carrier plate, AW55-50/51SN See: Service and Repair/Removal and Replacement.
Other information:
-
For information about replacing the transmission, see Replacing the transmission, AW55-50/51SN See: Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement/Replacing The Transmission.
Was the carrier plate undamaged?
Yes - Resetting the adaptation and oil quality counter
No - No Fault Found
-------------------------------------------------
Resetting the adaptation and oil quality counter
Resetting the adaptation
Resetting adaptation and the counter for "Transmission oil change"
Hint: The transmission has torque controlled adaptive pressure control. Pressure control means that the transmission regulates the pressure itself during
each gear shift. This avoids harsh gear shifting. Each gear shift is evaluated by the control module and stored in the memory. This allows for
compensation for wear and tear in the transmission and clutch. It is important that the adaptation in the memory is reset after the transmission has been
repaired. This is to ensure normal operation. The oil is replaced during repair; the "Transmission oil change" counter must be reset. If the counter is not
reset when the fluid is drained and replaced, there is a risk that a diagnostic trouble code (DTC) will be stored in incorrect circumstances.
Note! This applies only if the transmission or one of the solenoids in the transmission have been replaced.