S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Install:
-
the washer hose
-
a new wiper arm
-
the nut.
Adjust the position of the wiper arm.
HINT: Adjust the headlamp wiper on the left hand side of the car so that the wiper blade does not catch under the stop when the nut is tightened. Lift the
wiper blade above the stop.
The wiper blade must be tensioned against the stop, see illustration A. On the right hand side of the car the blade must be above the stop when tightening
the nut, see illustration B.
Tighten the nut: Tighten to 4 Nm
Test the function of the headlamp washer/wiper.
Check that wiper arms park horizontally.