volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

ABS/TCS - ABS Lamp ON/DTC's Set|Page 16548 > < ABS/TCS - ABS Lamp ON/DTC's Set|Page 16546
Page 7
background image

Torque the shock bolts to 67 ft lbs. (90 Nm).

LH side values maximum permitted negative camber.

RH (right hand side) camber adjustment.

-

Before tightening the shock absorber connection on the RH side PULL the upper side of the wheel to the outside so that the camber value is (0.660)
more positive than the LH side.

Torque the shock bolts to 67 ft. lbs. (90 Nm).

RH side values maximum permitted negative camber.

Road test the car and check the driving properties.

-

If the car pulls to the right during driving lower the permitted camber value on the RH side.

Warranty Claim Information

Technical Service Bulletin # TJ15309

Date: 100802

Steering/Suspension - Uneven/Excessive Rear Tire Wear

TIE - Technical Journal

Title Uneven rear tire wear, Correction of excessive negative camber

Ref No US15309.4.0 en-GB

Issuer - 

Partner 3 US 7510 Volvo Cars North America

Func Group 6526

Func Desc control arm

Status Released

Status Date 2010-08-02

ABS/TCS - ABS Lamp ON/DTC's Set|Page 16548 > < ABS/TCS - ABS Lamp ON/DTC's Set|Page 16546