S40 L5-2.5L Turbo VIN 68 B5254T3 (2005)
Hood Hinge: Service and Repair
Hood hinge
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing hinges hood
Remove:
-
the hood
-
the 4 M6 screws at the top edge of the front fender.
Carefully bend in the fender to access the 2 hinge screws.
Place a support against the fender to prevent it being damaged.
Remove the 2 M8 screws and remove the hinge.
Installation
Note! For tightening torques, see Specifications. See: Specifications
Installing hinges hood