volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Universal Bus Module (USB)|Page 13723 > < Universal Bus Module (USB)|Page 13721
Page 10
background image

Applies to cars with manual gearbox

-

Remove the gear selector lever boot from the center console. First pry it off at the front edge using a weatherstrip tool and then unhook it at the
rear edge.

-

Remove the two screws holding the centre console's panel to the dashboard.

-

Loosen the connector to the centre console at the rear.

-

Remove the center console.

-

Lift up the tunnel console and pull it back slightly.

-

Unplug the big gray connector at the front.

Universal Bus Module (USB)|Page 13723 > < Universal Bus Module (USB)|Page 13721