S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Applies to the S40 and V50
-
Route the cable (B) inside the floor carpets, the lower B-post panel and the insulation panels, back to the rear edge of the right-hand rear wheel
arch. Route the cable along the existing cable harnesses in the cargo compartment.
Note! Ensure that the cable is positioned so that there is no risk of it catching or rubbing.
Applies to the S40 and V50 (not right-hand drive)
-
Continue routing the cable harness to the amplifier.
-
Position the cable harness at the existing cable harness to the side and at the rear edge of the cargo compartment, all the way from the right-hand
wheel arch to the amplifier.
-
Take a short tie strap from the kit and secure the cable harness at the existing cable harness.
Applies to the V50
-
Remove the clips and the insulation panel.
