volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 13673 > < Initial Inspection and Diagnostic Overview|Page 13671
Page 3
background image

-------------------------------------------------

Verification

Corrective actions

-

Ignition switch position II.

-

Check that the external sound source is connected correctly to the control module.

-

Check function of the Accessory USB Unit (AUU).

Is the function OK?

Yes - FAULT FOUND

No -  Information 

-------------------------------------------------

Information

Replace Accessory USB Unit (AUU).

Other information:

-

Signal description See: Testing and Inspection/Pinout Values and Diagnostic Parameters/Signal Specification, Accessory USB Unit (AUU) 

-

Component location See: Locations 

-

Universal Serial Bus (USB) Module See: Entertainment System Control Module/Service and Repair/Universal Serial Bus (USB) Module 

Continue -  Verification 

-------------------------------------------------

Verification

Corrective actions

-

Ignition switch position II.

-

Check that the external sound source is connected correctly to the control module.

-

Check function of the Accessory USB Unit (AUU).

Is the function OK?

Yes - FAULT FOUND

No -  Information 

-------------------------------------------------

Information

Information

Fault-tracing information

The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - FAULT-TRACING FAILED

No - Attempt New Test

------------------------

FAULT-TRACING FAILED - FAULT-TRACING FAILED

Attempt New Test - Information 

Initial Inspection and Diagnostic Overview|Page 13673 > < Initial Inspection and Diagnostic Overview|Page 13671