S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
-
Pull the wiring down underneath the collision member's right-hand mounting.
-
Secure the cable at the collision member with two joined cable ties from the kit.
-
Take pliers, P/N. 9987596, and widen the hole in the rubber grommet. Pull the cables through. Adjust the length of the cable harness up to the
rubber grommet.
-
Insert the cable harness into the cargo compartment through the hole in the car body. Press the rubber grommet into place.
Image A applies to the V50 without RTI (road traffic information)