S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
-
Remove the bumper cover by pulling it straight backwards.
-
Disconnect any parking assistance connectors.
-
Clean any underseal and dirt from the inner member of the bumper where the L-profile for the tow hitch is to be located.
-
Clean the metal flange on the inside and outside where the reinforcement stay is to be located.
-
Install the L profile on the inner member of the bumper with four M10x25 flange screws and corresponding flanged nuts. Do not tighten yet.