S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Slacken off the 6 screws.
Installation
Tighten the 6 screws.
Replacing the rear spoiler
Place the bumper cover on a soft surface.
Remove the spoiler from the bumper cover. First disconnect the 16 catches on the inside of the bumper cover. Then disconnect the 2 outer clips (1).
Then pull off the spoiler.
Note! On vehicles that have a tow hitch, a cut-out must be made for the tow hitch in the lower section of the bumper cover. See illustrations A
and B.