S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
INTRODUCTION
-
NOTE! Read through the whole installation instruction before starting the work.
-
The front page gives the date of this edition and the edition it replaces
-
The second page shows the tools needed for the installation and the contents of the installation kit
-
The illustrations display the procedure in order of operation. The order of operation is repeated in the text section
-
Cut out the text page in order to follow the illustrations and text at the same time.
Cargo compartment safety grille
-
Remove the protective caps over the nuts on both sides of the cargo compartment grille
-
Slacken off the nuts so that they are at the tips of the screws retaining the grille
-
Fold the rear backrests forward.
Installing the cargo compartment safety grille
-
Lift the grille into the car through the boot
-
Insert the rounded head of the mounting screw (1) into the rear part of the hole in the mounting in the left-hand cantrail. Slide the mounting for the
grille forward so that the screw is at the front edge of the cantrail mounting. Check that the screw is locked in the mounting and does not turn.
Note! Do not damage the headlining.
-
Position the locating pin (2) in the mounting for the grille. It must be in the rounded section of the cantrail mounting. Tighten the nut a little
