S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Detach the apron molding from the booster cushion. It is secured with 4 clips on the underneath of the booster cushion.
Remove the booster cushion from the vehicle.
Installation
Note! For tightening torques, see Specifications. See: Specifications
Installing booster cushions
Secure the apron molding on the underneath of the booster cushion using 4 clips.
Press into place.
Install:
-
the 2 M6 screws at the rear edge
-
the 2 M6 screws at the front edge.
Finishing
Function test
Check the function of the booster cushion.
Interior Rear View Mirror for the Child Seat
Interior rear view mirror for the child seat