S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
-
Cut out the text page in order to follow the illustrations and text at the same time.
Mudguards front/rear
Installing front mudguard
-
Turn the wheels to the left
-
Clean the area at the rear edge of the wing liner where the mudguard will be positioned
-
Remove the three screws holding the wing liner to the body. Place the screws to one side. New screws are supplied in the kit.
-
Clean the marked surface at the rear edge of the front wing. Use a mixture of 30% windscreen washer fluid and 70% water. Wipe dry.
-
Remove the backing from the masking tape
-
Secure the masking tape at the front edge on the front wing. Position the tape just inside the curve of the front wing as illustrated
-
Secure along the entire front edge first. Then securely press backwards. Puncture any air bubbles using a needle
-
Press the masking tape into place firmly.