S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Caution! Do not damage the painted surfaces.
Remove the spoiler using two T-handles with a round steel wire between. Use: 951 2333 handle See: Tools and Equipment/951 2333 Handle.
Installing
Installing spoiler
Remove tape remains from the part and from the vehicle. Use: 951 2942 Circle See: Tools and Equipment/951 2942 Circle and 951 2949 Holder See:
Tools and Equipment/951 2949 Holder.
Wash the tape surfaces on the spoiler and the trunk lid with a mixture of 30% isopropanol and 70% water. Wipe dry.
Screw in the two guide pins (all the way) in the spoiler's nuts. Then insert the guide pins in the trunk lid's holes and check that the spoiler fits in the four
drilled holes.
Note! Adjust the holes with a small round file as needed.
Rustproof the hole edges as needed.
