S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Applies to left-hand drive vehicles (LHD):
Install the protective cover by sliding it towards and under the windshield (1).
Press the front edge of the protective cover firmly so that the butyl tape adheres to the plate (2).
Installing the protective cover (RHD)
Applies to right-hand drive vehicles (RHD):
Install the protective cover by sliding it towards and under the windshield (1).
Press the front edge of the protective cover firmly so that the butyl tape adheres to the plate (2).
Installing the plenum chamber
Install the cowl in the correct position. Ensure that the rubber seals against the fenders and the windshield are correctly located. Check that the guide
clips underneath the cowl are in the correct position in relation to the windshield.
Turn the 2 catches clockwise ¼ turn. Check that the marking on the relevant catch is turned toward the windshield.
Install the 4 clips.
Note! Start with the outer clips.